No products in the cart.
Icom IC-GM800
Icom IC-GM800 meets the GMDSS (Global Maritime Distress and Safety System) VHF and MF/HF radio requirements as required for SOLAS regulated commercial vessels engaging in international voyage
Category: Radio Digital
Tag: Icom IC-GM800
Icom IC-GM800 Specifications
| Frequency range (Unit: MHz) | TX | 1.6–27.5000 (ITU marine channels) |
|---|---|---|
| RX | 0.5–29.9999 (continuously) | |
| DSC | 2.1875, 4.2075, 6.3120, 8.4145, 12.5770, 16.8045 | |
| Type of emission | TX/RX | J3E (USB/LSB*), H3E* (AM), J2B* (AFSK), F1B (FSK), A1A* (CW)* Receive only. |
| DSC | F1B | |
| Power supply requirement | 24 V DC (21.6–31.2 V) (floating ground) | |
| Dimensions (projection not included; W×H×D) | Main unit | 367 × 95 × 260 mm |
| Controller | 274 × 114 × 86 mm | |
| Weight (approximately) | Main unit | 8.6 kg |
| Controller | 760 g | |
| RF output power | 150W PEP into 50 Ω (at radio terminal) 125W (4.0–27.5 MHz) (at tuner-output) 85W (1.6–3.999 MHz) (at tuner-output) | |
| Current drain | Transmit (Max. power) | Less than 20 A (at 1.1 kHz and 1.7 kHz two tones) |
| Receive (Max. audio) | Less than 3.0 A | |
| Sensitivity | J3E, A1A (20 dB SINAD) | 30 dBμV emf (0.5–1.599 MHz) 16 dBμV emf (1.6–3.999 MHz) 11 dBμV emf (4.0–29.999 MHz) |
| J2B, F1B (1% error rate) | 3 dBμV emf (1.6–2.099 MHz) 0 dBμV emf (2.1–27.500 MHz) | |
| H3E (20 dB SINAD) | 44 dBμV emf (0.5–1.599 MHz) 30 dBμV emf (1.6–3.999 MHz) | |
| DSC (J2B) (1% error rate) | 0 dBμV emf | |
| Audio output power | External SP | 4 W with 4 Ω load |
| Internal SP | 2 W with 8 Ω load | |
| IEC 61162-1 in/out format | Input | GGA, GNS, GLL, RMC, FSI |
| Output | FSI, DSC, DSE | |
Measurements made in accordance with EN300 373-1 for GM800.
You can scroll
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| Water (GM800 controller unit) | IPX7 (1 m depth water for 30 minutes) |
You can scroll
Supplied Accessories
・ HS-98 handset
・ Mounting bracket kit
Icom IC-GM800 (MF/HF) and GM600 (VHF) have a unified design and offer consistent operation. A combination of the directional keypad and soft keys provides simple operation. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.
Other Features
- Remote Distress alarm
- Printer connector (Centronics IEEE1284)
- IEC 61162-1 interface for GNSS receiver
- Output power: 150 W* PEP into 50 Ω(at radio terminal, GM800)
- Built-in 24 V DC-DC converter
Reviews
There are no reviews yet.